Wisefab Nissan R34 Front Drift Angle Lock Kit Wire-In ECU CT9A Lancer Evolution 8 (models

CT9A Lancer Evolution 8 (models with 4-plug ECU only)

Using Link G4/G4+/G4X ECU’s select the MAP sensor type in PC Link as ‘Link 2

Vipec i88 (Loom A/Pin Kit A also required)

Caster is not the only important parameter to provide sufficient self-alignment torque

which is not a positive effect

Wisefab Nissan R34 Front Drift Angle Lock Kit Wire-In ECU CT9A Lancer Evolution 8 (models65 degrees of lock, parallel steering. You can tune your steering geometry either towards positive or negative Ackermann in just a few minutes even at trackside without messing up an alignment. Ackermann adjustment kit included. Adjustable lock stopper. One piece design. Lower 2 piece arm is replaced with one piece design to increase system stiffness that is needed for high lock. Higher roll center (RC). On Wisefab Nissan R chassis knuckle, both